Hospital Furniture

Basic Care

The ergonomic hospital bed with impeccable design Basic Care has been developed to offer quality and resistance at the best price



Mattress base

Design and comfort



Structure made of steel tube with epoxy coating

Headboard and footboard fixing system, without the need for tools


Lateral arches, which prevent displacement of the mattress

Lifting systems supported by compasses that provide great stability in any position and allow a load of up to 250 kg. SGS certified


Four removable modules made of ABS. 100% useful area

Optional: Integrated bed extension with bedding support (±20cm.)

Optional: Radiolucent bed for the plane of the trunk with optional chassis holder (Ref.CHV26)


Anti-decubitus system, in the trunk plane, offering protection against pressure ulcers

Articulation of the bed base planes using low voltage electric motors, complying with EN 60601-1 regulations.

Foot plane independent of the knee plane with mechanical articulation, providing greater ergonomics


Height elevation from 41.4 cm to 80.5 cm by electric drive

Centralized brake system and servo steering. Ø150mm double band wheels

Manual keypad with pictograms for easy reading and handling

Bed Function Cancellation Device

Thermoplastic lower fairing that protects the bed mechanisms and facilitates cleaning

Split handrails in ABS (4) complying with regulations 60601-2-52

Optional: Set of metal railings

Emergency release system of the trunk plane that allows a rapid descent of the plane in case of emergency, battery failure or power failure

Technical file

Technical data

  • External dimension: 2130 x 960 mm
  • Patient surface dimension: 2000 x 870 mm
  • Height adjustment: 415- 805 mm
  • Backrest tilt: 65º
  • Legrest tilt: 33º
  • Maximum weight load: 250 kg
  • Weight of the bed without accessories: 150 kg
  • Backrest section auto-regression: 110 mm
  • Legrest section auto-regression: 40 mm

Electrical characteristics

  • Power supply: 110-230V 50-60Hz
  • Maximum Consumption: 3.15A, 230 Volt
  • Protection indicator: IP X4
  • Protection class: Class II
  • Degree of protection against discharge: TYPE B


Optional accessories

  • Set of metal or ABS railings
  • Integrated bed extension with bedding holder
  • Radiolucent bed for the backrest section with optional chassis holder


All products manufactured by MEDISA comply with directive 2007/47/EEC on medical devices (Annex I and Annex VII)

In the same way, all its processes have been evaluated and certified according to the requirements of the UNE-EN ISO 9001:2015 Quality Management standard, the UNE-EN ISO 14001:2015 Environmental Management standard and the UNE-ENE ISO 13485 standard. :2016 Quality Management of health products

MEDISA products are subject to the standards EN-ISO 14971, EN-ISO 15223-1, EN-ISO 13485, EN 60601-1, EN 60601-1-2, EN 60601-2-52, EN 60601-1-6 , EN 60601-1-8, EN 62366

Certified by CSQ: CERTIFICATES Nº 9120.MDIB, Nº 9191.MDI2, Nº 9124.MIBE

Scope: design, manufacturing, marketing and technical assistance of hospital beds and chairs. Marketing of hospital furniture


¿Are you interested
in any product?

Contact with us