Characteristics
category
Mattress base
Comfort
Handling and control systems
Safety
Structure made of steel tube with epoxy coating
New ergonomic headboard/footboard design that makes it easier to hold the mattress, preventing it from moving.
Fixing system with safety lock, for tool-free removal
Adjustable side arches, which prevent movement of the mattress
Incorporation of supports that allow the adaptation of accessories (IV stick, incorporator, etc.) in each corner of the bed
Lifting systems supported by compasses that provide great stability in any position and allow a load of up to 250 kg
Four independent and removable modules made of HPL. Useful area 100%
Four independent handrails made of medical HDPE according to EN 60601-2-52 regulations with cushioned descent system assisted by a gas piston and vertical adjustment using a single hand
The design of the handrails allows the patient to be protected on the entire resting surface 100%
The HDPE rails have an integrated angle indicator, for greater control of visual angulation for both the throne plane and TR/ATR of the bed
Automatic stop of the backrest at 30º: automatic detection system for raising and lowering the backrest section when it is positioned at 30º with acoustic warning
Integrated bed extension with bed linen support or for housing the nursing supervision panel (±32cm)
Anti-decubitus system, with double automatic regression. This mechanism allows the plane of the trunk (11 cm) and legs (7 cm) to be positioned
Articulation of the bed base planes, height by means of scissors, trendelenburg and anti-trendelenburg by means of low voltage electric motors, complying with EN 60601-1 regulations, with protection level IP66
Foot plane independent of the knee plane with 5-position mechanical articulation, providing greater ergonomics
Cardiac chair position to facilitate patients’ stay in bed
Function cancellation system individually or simultaneously using the “STOP” button
Centralized and servo-directed braking system. Ø150mm double band wheels. fairings and anti-static. They allow better mobility of the product when it is subjected to high loads
5th wheel central, directional and cushioned, Ø125 mm. 360º swivel with two gases that adapt to uneven ground
Independent controls: integrated into the handrail with “GO” safety activation button, optional
Nursing panel: has predetermined bed movement functions
It has a system for canceling functions individually or simultaneously using the “STOP” button.
Trunk plane emergency release system in case of emergency, battery failure or power failure (RCP position)
Double LED safety positioning light (green to indicate the minimum height, red when it exceeds the minimum safety height), optional
Thermoplastic lower fairing that protects the bed mechanisms and makes cleaning easier
Anti-pinch system with automatic engine stop when an obstacle is detected
Anti-collapse system in the lifting actuators in case of failure
Technical file
Technical data
- External dimension: 1883 x 989 mm
- Patient surface dimension: 1685 x 850 mm
- Height adjustment: 395- 775 mm
- Backrest tilt: 67º
- Legrest tilt: 28º
- Backrest autoregression: 150 mm
- Trendelenburg / reverse trendelenburg: ± 16º
- Maximum weight load: 250 kg
- Weight without accessories: 150 kg
Electrical characteristics
- Power supply: 240-100V 50-60Hz
- Maximum consumption: 5A Hz, 100-240V
- Protection indicator: IP 66
- Protection class: Class II
- Degree of protection against discharge: B TYPE
Accessories
Optional
- Urine bag support
- Incorporator
- Removable headboard and footboard
- IV Pole
- Viscoelastic mattress
- Footrest table
Normative
All products manufactured by MEDISA comply with directive 2007/47/EEC on medical devices (Annex I and Annex VII).
In the same way, all its processes have been evaluated and certified according to the requirements of the UNE-EN ISO 9001:2015 Quality Management standard, the UNE-EN ISO 14001:2015 Environmental Management standard and the UNE-ENE ISO 13485 standard. :2016 Quality Management of health products.
MEDISA products are subject to regulations EN-ISO 14971, EN-ISO 15223-1, EN-ISO 13485, EN 60601-1, EN 60601-1-2, EN 60601-2-52, EN 60601-1-6 , EN 60601-1-8, EN 62366.
Certified by CSQ: CERTIFICATES Nº 9120.MDIB, Nº 9191.MDI2, Nº 9124.MIBE.
Scope: design, manufacturing, marketing and technical assistance of hospital beds and chairs. Marketing of hospital furniture.
