Searcher

Hospital Furniture

Transmed Fijo

Fast and safe stretchers for any situation

Characteristics

category

Mattress Base

Comfort

Handling

Safety

Structure made of steel tube with epoxy coating

Bed composed of 4 sections (3 articulated and 1 fixed) made of compact HPL material

Resistant to moisture and impact, allowing for simple cleaning

Cardiac chair position

Fully transparent radio bed base

Useful area 100%

Support for additional IV poles (depending on size) in the corners

Urine bag hooks on each side of the stretcher

 

X-ray permeable mat, 10 cm thick

Padding made of high-density polyurethane foam, designed for optimal comfort and ergonomic suitability

Upholstered in self-extinguishing vinyl fabric

With four 200mm diameter, antistatic wheels and a wheel with servo steering

Centralized brake and directional lock via pedal located on each wheel

5th wheel diameter 125 mm servo assisted with gas spring

Folding handles to facilitate handling of the stretcher during transfer

Articulation of the trunk plane by pneumatic operation up to an angle of 90º

Height elevation from 515 mm to 820 mm using hydraulic columns

Hip and leg articulation by means of gas springs by bilateral levers, which provides greater ergonomics

Trendelemburg / Reverse trendelemburg ±16º by hydraulic drive

Bilateral pedal for hydraulic height adjustment and for Trendelenburg and Reverse trendelenburg control

Protective bumpers located in the corners

ABS lower fairing for easy cleaning, with built-in oxygen bottle holder

Folding side rails 150 long x 34 cm high; 29 cm distance between vertical bars

Easy and safe handling, without risk of bruising or entrapment

Its lowest position does not exceed the height of the mat

Technical file

Dimensions

  • External dimension: 204 x 89 cm
  • Patient surface dimensión: 189 x 68 cm
  • Backrest dimensions: 620 x 710 mm
  • Legrest dimensions: 660 x 1160 mm

Technical data

  • Height adjustment: 515 – 820 mm
  • Height adjustment with chassis support: 570 mm – 880 mm
  • Backrest tilt: 90º
  • Trendelenburg/Reverse trendelenburg: ± 16º
  • Maximum weight load: 317 kg
  • Weight without accessories: 100 kg

Accessories

Included

  • Mattress
  • Foldable and height adjustable IV pole

Optional

  • Monitor support
  • Paper roll holder
  • Transfer mat

Normative

All products manufactured by MEDISA comply with directive 2007/47/EEC on medical devices (Annex I and Annex VII).

All processes have been evaluated and certified according to the requirements of the UNE-EN ISO 9001:2008 standard for Quality Management and the UNE-EN ISO 14001:2004 standard for Environmental Management, and the UNE-EN ISO 13485 standard for medical devices.

 

The product complies with the new European Regulation 745/2017 on medical devices and controlled under the EN ISO 9001:2015 quality management system.

Product

¿Are you interested
in any product?

Contact with us